top of page

Forum Posts

leadingcoating1
Nov 22, 2022
In General Discussion
Common desulfurization pumps include fluorine lined centrifugal pumps, mortar pumps, stainless steel pumps, etc. the seals include mechanical seals, power seals, double face seals and packing seals, etc. What is the role of these seals? 1. Packing seal Put the compressible and resilient packing into the stuffing box, and convert the axial compression force of the gland into radial sealing force, so as to play a sealing role. This sealing method is called packing sealing, and this packing is called sealing packing. Packing seal is widely used in pump design because of its simple structure, convenient replacement, low price, wide adaptability to speed, pressure and medium. When transporting normal temperature media, the packing seal is generally equipped with a packing ring, which is either connected with the high-pressure chamber of the pump or externally connected with a certain pressure of liquid media, which can play the role of cooling, lubrication, sealing or flushing. As the packing seal is a contact seal, there must be friction and wear problems. The size of friction and wear mainly depends on the compression force of the packing gland. High pressure can improve the sealing effect, but it will increase the power consumption and wear of the shaft sleeve, otherwise it will produce large leakage. Therefore, the pressing force of the gland should be adjusted according to the leakage volume and the temperature of the leaking medium, and the packing should be replaced or supplemented if necessary. The reasonable leakage of packing seal is generally 10-20ml/min. When introducing liquid from the outside, it should be ensured that this liquid has good chemical stability, which will not pollute the medium delivered by the pump, nor react with the medium to produce sediment and solid particles. It should also have good impregnation and lasting retention with the filler, so as to have a good and lasting sealing effect. 2. Power seal When the auxiliary impeller plus parking seal pump is running, the pressure head generated by the auxiliary impeller balances the high-pressure liquid at the outlet of the main impeller, so as to realize sealing. During shutdown, the auxiliary impeller does not work, so the shutdown sealing device must be equipped at the same time to solve the possible leakage during shutdown. The sealing structure of the auxiliary impeller is simple, reliable, long service life, and no leakage can be achieved during operation. Therefore, it is often used in pumps conveying media containing impurities. The good sealing effect of the auxiliary impeller is conditional, that is, the working pressure is not allowed to exceed the allowable working pressure. Once exceeded, serious leakage will occur. The main reason for the change of working pressure is the pressure change at the suction port of the pump. Therefore, for the pump with auxiliary impeller seal, strict regulations must be made on the inlet pressure of the pump, otherwise the seal will fail. Due to many forms of parking seals, it is easy to find them after failure, so this article will not repeat it. Magnetic Levitation Molecular Pump For Semiconductor Industry Liquid ring vacuum pump Liquid ring vacuum pump manufacturer
0
0
1
leadingcoating1
Sep 13, 2022
In General Discussion
Construction of modern tubular heating furnaces There are three types of linings commonly used in modern tubular heating furnaces: brick structure, refractory fiber spray structure and castable structure.Chain link vacuum quenching and tempering brick structure Brick lining is made of refractory bricks, including standard refractory bricks and special-shaped refractory bricks. The advantage is that different types, properties and grades of refractory bricks and refractory mud can be selected according to the working temperature, working conditions and heat load of different parts of the heating furnace. The disadvantage is that the integrity and sealing of the furnace lining are poor, and the construction efficiency is low.PCB micro-drill vacuum brazing Refractory fiber sprayed structure Refractory fiber spraying is to send the pretreated bulk fiber cotton out of the spray gun at high pressure through a special fiber spraying machine, and at the same time, through several sets of special fluid conveying equipment, the inorganic binder is evenly sprayed into the fiber cotton through the outer ring of the spray gun.Direct Quenching and Vacuum Tempering Process of Structural Steel The external mixture is sprayed onto the inner wall of the furnace. The advantages of refractory fiber spraying construction technology are fast construction speed, seamless lining and good air tightness, which is especially suitable for the construction of complex and special-shaped furnace walls. Vacuum heat treatment of high speed steel rolls
1
2
2
leadingcoating1
Sep 09, 2022
In General Discussion
Decomposition furnace is a new type of thermal equipment in which fuel combustion, heat exchange and decomposition reaction are carried out simultaneously; its types and forms are various. The basic principle is: the preheated raw meal, a certain amount of fuel and an appropriate amount of hot gas are fed into the decomposition furnace at the same time, and the raw meal is in a suspended or boiling state in the furnace; below 900 C, the fuel burns without flame. At the same time, the heat transfer and calcium carbonate decomposition process are completed at a high speed: the burning time of the fuel and the time required for the decomposition of calcium carbonate take about 2 to 4 s, and the decomposition rate of calcium carbonate in the raw meal can reach 85% to 95%. Vacuum heat treatment of high speed steel rolls The temperature of the preheated material is 800~850°C. Solid, liquid or gas fuel can be used in the calciner. In my country, pulverized coal is mainly used as the fuel, and the fuel added to the calciner accounts for about 55% to 65% of the total fuel.Direct Quenching and Vacuum Tempering Process of Structural Steel
1
1
1
leadingcoating1
Sep 08, 2022
In General Discussion
The use of ceramic fiber muffle furnace The ceramic fiber muffle furnace heating wire adopts the world's top alloy material. The heating temperature of the ceramic fiber muffle furnace is uniform and the heating speed is fast. It only takes 12 minutes to rise to 1000 ℃ (very suitable for the chemical industry), while the traditional muffle furnace needs about 80 minutes, and the energy saving performance is good. BA-3-10B ceramic fiber muffle furnace It is about 40% of the energy consumption of ordinary muffle furnaces, and no dust or slag will not affect the effect of the test.Vacuum sintering of tensile screw surface When the ceramic fiber muffle furnace is used for the first time or after a long-term non-use, it must be oven-baked. The oven time should be four hours at room temperature of 200°C. 200°C to 600°C for four hours. When using, the maximum furnace temperature should not exceed the rated temperature, so as not to burn the electric heating element. It is forbidden to pour various liquids and easily soluble metals into the furnace. The Maofu furnace is best to work below the maximum temperature of 50 ℃, and the furnace wire has a longer life.Vacuum Heat Treatment in Mechanical Manufacturing The muffle furnace and controller must work in a place where the relative temperature does not exceed 85%, and there is no conductive dust, explosive gas or corrosive gas. When the metal material with grease and the like needs to be heated, a large amount of volatile gas will affect and corrode the surface of the electric heating element, destroying it and shortening its life. Therefore, when heating, it should be prevented in time and sealed containers or appropriate openings should be excluded.How to Update your heat treatment
1
1
1
leadingcoating1
Sep 07, 2022
In General Discussion
The structure of the trolley furnace Generally, the shell of the trolley furnace is welded by steel plate and section steel. The lining material of the electric furnace is made of ultra-light 0.6g/cmЭ energy-saving refractory insulation bricks. The interlayer is insulated with aluminum silicate fiber felt. Filling and expanding to stone powder insulation, the furnace mouth adopts heavy anti-collision bricks, and the trolley surface layer is heavy and high-alumina anti-pressure bricks. Labyrinth-type refractory materials are used to build the exterior between the electric furnace body and the trolley. The heating elements of this electric furnace are all helical heating elements, which are placed on the side of the furnace and the masonry of the trolley.Which process should be used for quenching after vacuum carburizing? The trolley is equipped with a chromium-manganese-nitrogen heat-resistant steel furnace bottom plate or a 1200 ℃ silicon carbide furnace bottom plate to carry the workpiece. If it is damaged, it is necessary to regularly purge the oxide scale under the bottom plate of the trolley furnace, usually once a week. When purging, the furnace bottom is hoisted, and the oxide scale in the resistance wire groove is cleaned with compressed air.Vacuum heat treatment of high-speed turning tools The lifting and lowering of the furnace door of the trolley furnace is realized by rolling up and down on the guide rail, which not only ensures the matching and sealing between the furnace door masonry and the furnace body masonry when the furnace door is closed, but also ensures that when the furnace door is opened During the process, the masonry will not be damaged by friction. The movement of the furnace door and the trolley is provided by the motor through the worm gear reducer and the chain drive, and is equipped with an electromagnetic brake for proper adjustment.Vacuum heat treatment process of TC11 titanium alloy pipe
1
1
1
leadingcoating1
Sep 06, 2022
In General Discussion
Classification of welding machines There are many types of welding machines, including single-point single-function, single-point dual-function, single-point multi-function (this type of welding machine also has only one welding head, after changing the form of the positioning plate, it can be used for any angle between 90° and 180°. angle welding). There are also two-point, three-point, four-point and even six-point welding machines and four-point welding machines. Different types of welding machines have different welding functions and work efficiencies.Vacuum Sintering of Alumina Ceramics The welding machine is mainly divided into two types according to the material: plastic welding machine and metal welding machine. The applied technologies mainly include: ultrasonic, high frequency, plasma, electrothermal, rotary, etc.Improvement of Soft Magnetic Properties of FeCo Alloys by Vacuum Heat Treatment Among them, the plastic welding machine is used for welding polyethylene, polypropylene, polypropylene, nylon and other thermoplastic engineering plastic sheets or products. During operation, the plastic electrode is melted and sprayed out, and the workpiece to be welded is fused with it and bonded. It is widely used in welding and maintenance of plastic equipment, plastic floor laying, plastic pipe connection, plastic bottle sealing and other operations.Metal injection molding vacuum sintering furnace
1
1
1
leadingcoating1
Sep 05, 2022
In General Discussion
Operation of the Cooler Cooling furnace refers to the operation process in which the hot blast stove is cooled from the production hot state to normal temperature, and is an important link in the production of the hot blast stove. Different refractory materials and different shutdown methods apply different cooling furnace methods.Vacuum heat treatment process of steel bearing parts When the blast furnace is in normal production, there is a cooling furnace when the inner masonry of the hot blast stove needs to be overhauled in the hot blast stove group. Shougang's cooling furnace experience is as follows: 1) Set the No. 1 hot blast stove to be repaired. During the last air supply, reduce the temperature of the top of the furnace to 1000-1050 °C, then change the furnace, close the air mixing valve after changing the furnace, and use the No. 1 hot blast stove for air mixing Furnace, its cold air valve is used as air temperature control valve, and it is not allowed to be fully closed;Deformation and Improvement of Slicing Knife Vacuum Quenching 2) During the mixing process of No. 1 furnace, the other two hot blast furnaces take turns supplying air. After 3 cycles, the air temperature is lowered to 200°C lower than the normal air temperature (the blast furnace load is correspondingly reduced), and No. 1 continues to be used for mixed air;Vacuum Heat Treatment of 42CrMo Steel High Strength Bolts 3) When the temperature of No. 1 furnace top drops to 250℃, stop working as a mixed-air furnace, close its cold and hot air valves, open the waste air valve and flue valve, and then start the combustion-supporting fan to continue to force the furnace to cool; 4) After the dome temperature drops from 250°C to 70°C, stop the combustion-supporting fan and complete the cooling of the furnace.
1
1
1
leadingcoating1
Sep 02, 2022
In General Discussion
How the total heat exchanger works The working principle of the total heat exchanger is to filter and purify the outdoor fresh gas, and then send it into the room after heat exchange treatment. A high-efficiency, energy-saving and environmentally friendly high-tech product influenced by fresh air.Vacuum annealing process of TC4 alloy sheet The core device of the total heat exchanger is the total heat exchange core. The dirty air discharged from the room and the fresh air sent from the outside not only exchange temperature through the heat transfer plate, but also exchange humidity through the micropores on the plate, so as to achieve both ventilation and air exchange. The air also keeps the indoor temperature and humidity stable.Vacuum heat treatment process of rolling die This is the full heat exchange process. When the total heat exchanger operates during the cooling period in summer, the fresh air obtains the cooling capacity from the exhaust air, which reduces the temperature, and at the same time is dried by the exhaust air, which reduces the humidity of the fresh air; in winter, the fresh air obtains heat from the exhaust air, making the The temperature rises and is humidified by the exhaust air at the same time.CuMnNi brazing filler metal vacuum brazing 40Cr steel and YG8 cemented carbide
1
1
2
leadingcoating1
Sep 01, 2022
In General Discussion
The working form of the total heat exchanger The heat exchanger used in the total heat exchanger has two forms, static and rotating, among which the rotary heat exchanger also belongs to the rotating type.Sintered NdFeB Vacuum Heat Treatment Process From the perspective of normal use and maintenance, the static type is better than the rotary type, but for a large machine larger than 2×10000m3/h, it can only be achieved by a rotary heat exchanger. Therefore, it can be said that the static type and the rotary type are different. There are pros and cons.Influence of nickel and tin elements on vacuum brazing of titanium materials In order to easily arrange the airflow passages in the equipment to reduce the volume of the whole machine, the total heat exchanger adopts a cross-flow, static plate heat exchanger. That is, the moving directions of the hot and cold gases are perpendicular to each other, and the airflow belongs to the convective heat transfer property in the turbulent boundary layer.Valve body vacuum heat treatment Therefore, sufficient heat exchange can achieve high energy-saving effect.
1
1
1
leadingcoating1
Aug 31, 2022
In General Discussion
How the total heat exchanger works The working principle of the total heat exchanger is to filter and purify the outdoor fresh gas, and then send it into the room after heat exchange treatment. A high-efficiency, energy-saving and environmentally friendly high-tech product influenced by fresh air.Effect of Magnesium on Aluminum Alloy Vacuum Brazed Joints The core device of the total heat exchanger is the total heat exchange core. The dirty air discharged from the room and the fresh air sent from the outside not only exchange temperature through the heat transfer plate, but also exchange humidity through the micropores on the plate, so as to achieve both ventilation and air exchange. The air also keeps the indoor temperature and humidity stable. This is the full heat exchange process. When the total heat exchanger operates during the cooling period in summer, the fresh air obtains the cooling capacity from the exhaust air, which reduces the temperature, and at the same time is dried by the exhaust air, which reduces the humidity of the fresh air; in winter, the fresh air obtains heat from the exhaust air, making the The temperature rises and is humidified by the exhaust air at the same time.Vacuum Heat Treatment Process of 38CrMoAI Steel The total heat exchanger is mainly composed of a heat exchange system, a power system, a filter system, a control system, a noise reduction system and a box.Plate Heat Exchanger Vacuum Brazing
1
1
2
leadingcoating1
Aug 30, 2022
In General Discussion
The working principle of the tempering furnace The tempering furnace is suitable for the production of high-quality, ultra-thin, ultra-small standard or super-large standard flat tempered glass such as high-end industrial surfaces, household appliances, lamps and lanterns, building decoration, and tempered lamination.Gear Gas Nitriding Common Problems And Countermeasures First, the working principle of the tempering furnace: 1. Physical method The glass tempering equipment heats the flat glass and then quenches it, so that the surface layer of the cooled glass forms compressive stress and the inside of the glass forms tensile stress, so as to improve the strength of the glass and make ordinary annealed glass into tempered glass device of. Since this tempering method does not change the chemical composition of the glass, it is called physical glass tempering equipment.Gear shaft vacuum heat treatment 2. Chemical tempering equipment improves the strength of glass by changing the chemical composition of the glass surface.Vacuum heat treatment process of plastic mold parts At present, there are methods such as surface dealkalization and alkali metal ion exchange. Because this tempering method changes the chemical composition of the glass, it is called chemical method glass. Tempering equipment.Vacuum Brazing of Stainless Steel and Dissimilar Materials
1
1
1
leadingcoating1
Aug 29, 2022
In General Discussion
The use of high temperature muffle furnace What is a muffle furnace? High temperature muffle furnace is a general heating equipment, also called high temperature box furnace. After unpacking, check that the muffle is intact and that the accessories are complete. General muffle furnace does not need special installation, just lay flat on the floor or shelf indoors. The controller should avoid vibration and should not be placed too close to the electric furnace to prevent the internal components from not working properly due to overheating.Influence of Brazing Vacuum Degree on Copper and Hafnium Brazed Joints 2. A thermocouple is inserted into the furnace for 20-50mm, and the gap between the hole and the thermocouple is filled with asbestos rope. It is best to use compensation wire (or insulated steel core wire) to connect the thermocouple to the control, pay attention to the positive and negative poles, do not connect them in reverse. 3. An additional power switch needs to be installed at the introduction of the power cord to control the main power supply. In order to ensure safe operation, the electric furnace and the controller must be reliably grounded.Oil cooler vacuum brazing 4. Before use, adjust the thermometer indicator to the zero point. When using the compensation wire and the cold junction compensator, the mechanical zero point should be adjusted to the reference temperature point of the cold junction compensator. When the compensation wire is not used, the mechanical zero point Set to zero scale, but the temperature indicated is the temperature difference between the measuring point and the cold junction of the thermocouple.Valve body vacuum heat treatment
1
1
1
leadingcoating1
Aug 26, 2022
In General Discussion
The working principle of nitrogen generator Nitrogen generator refers to a device that uses air as raw material and uses physical methods to separate oxygen and nitrogen in it to obtain nitrogen. Nitrogen generators used in industry can be divided into three types according to different classification methods, namely cryogenic air separation, molecular sieve air separation (PSA) and membrane air separation.Automobile vacuum carburizing gear steel The principle of nitrogen production by cryogenic air separation Cryogenic nitrogen production can not only produce nitrogen but also liquid nitrogen, which meets the process requirements of liquid nitrogen, and can be stored in liquid nitrogen storage tanks.High Voltage DC Relay Vacuum Brazing After entering the vaporizer and being heated, it is fed into the product nitrogen pipeline to meet the nitrogen demand of the process unit. The operation cycle of cryogenic nitrogen production (referring to the interval between two large heatings) is generally more than 1 year. Therefore, cryogenic nitrogen production is generally not considered for backup. The pressure swing adsorption nitrogen production can only produce nitrogen, there is no backup means, and a single set of equipment cannot guarantee continuous long-term operation.A3 axle vacuum heat treatment process
1
1
3
leadingcoating1
Aug 25, 2022
In General Discussion
What is a glass melting furnace The glass melting furnace is a high-temperature energy-saving vertical resistance furnace specially designed for glass melting in the glass industry. The main operation process is as follows: put a crucible (the one used in the glass industry) in the furnace, then put the prepared glass frit directly into the crucible from above, and then heat it with electricity, when the temperature rises to more than 1200 ℃, the glass When the frit is in a molten state, use a special crucible hook to open the flow hole at the bottom of the crucible, and the molten glass frit automatically flows into the container below.Vacuum Heat Treatment Process of Rolling Bearings Structural features: Double-layer shell structure, programmable 50-stage automatic heating, phase-shift triggering, thyristor control, the furnace is made of alumina polycrystalline fiber material, with balanced temperature field, low surface temperature, fast temperature rise and fall rate, energy saving And other advantages, unique furnace design, durable; Vacuum heat treatment of die casting partsTaiwan intelligent automatic temperature controller is a double-line LED display dial, mainly used for GWL-R temperature control, high temperature control accuracy (plus or minus 1 degree), sensitive response, can Programming PID control, with deviation, over-temperature alarm and power-off protection, safe and reliable operation.Vacuum brazing process of electrical contact brazing rate
1
1
1
leadingcoating1
Aug 24, 2022
In General Discussion
What is a washing machine The cleaning machine is used to flush and filter the pollutants generated or invaded by the hydraulic system during manufacturing, assembly, use and maintenance; it can also be used for regular maintenance and filtration of working oil to improve cleanliness and avoid or reduce pollution caused by failure, thus ensuring the high performance, high reliability and long life of the hydraulic system equipment.Vacuum Brazing of Waveguide Components The varieties of cleaning machines are: triclosan machine, gas camera, hydraulic cleaning machine, cold water pressure cleaning machine, hot water pressure cleaning machine, electric driving cleaning machine, gasoline driving cleaning machine, electric heating high pressure cleaning machine, diesel heating high pressure cleaning machine, ultra-high pressure cleaning machine High pressure mobile cleaning machine, industrial stainless steel high pressure cleaning machine, explosion-proof high pressure cleaning machine, hydraulic cleaning machine, ultrasonic cleaning machine.Metal tungsten vacuum sintering process Ultrasonic cleaner It is a kind of technology that uses ultrasonic cavitation, through the principle of ultrasonic transducer vibration emission, to thoroughly clean the dirt, grease, sediment and other dirt attached to the object. The cleaning effect is obvious and intuitive. It is a combination of washing and cleaning. , sterilization as one of the full ultrasonic cleaning.1Cr18Ni9Ti stainless steel vacuum nitriding
1
1
2
leadingcoating1
Aug 23, 2022
In General Discussion
Ceramic heat exchangers Ceramic heat exchangers have the following characteristics: a. High temperature resistance, corrosion resistance, good heat exchange effect and high energy saving rate. But the part where the metal heat exchanger is placed on the ceramic heat exchanger is quickly burned out. b. The use method of the ceramic heat exchanger is direct, simple, fast, less one-time investment, low investment cost, stable heat exchange temperature, high efficiency, long life, no blockage, no air leakage, easy to replace, and there is no gas when switching waste away. c. In terms of service life, the ceramic heat exchanger is several times or dozens of times that of the metal heat exchanger under the same conditions.Plunger Nitriding Process If the heat exchanger is not used, the temperature of the combustion-supporting air is normal temperature (-10℃-40℃), but the temperature of the combustion-supporting air heated by the ceramic heat exchanger can reach 300℃-800℃, which can not only achieve the purpose of energy saving, but also improve the environmental benefits.Copper-430 series stainless steel vacuum brazing process The waste heat recovery and utilization of the heating furnace can achieve an energy saving rate of 1% to 2%.Vacuum sintering of tungsten alloy in controlled micro-atmosphere
1
1
1
leadingcoating1
Aug 22, 2022
In General Discussion
Working principle of hot blast stove Hot blast stove is a thermal power machine. It has been widely used in my country in the late 1970s. It has become a replacement product of electric heat source and traditional steam power heat source in many industries. There are many varieties and series of hot blast stoves. They are divided into two types: hand-fired and machine-fired by the way of adding coal, and coal, oil, and gas stoves by the type of fuel.Diamond tool vacuum brazing The function of the blast furnace hot blast furnace is to heat the blast to the required temperature to improve the efficiency and efficiency of the blast furnace; it works according to the principle of "regenerative storage". The gas is burned in the combustion chamber, and the high-temperature exhaust gas passes through the checkered bricks to store heat. SUC bearing vacuum heat treatmentWhen the checkered bricks are fully heated, the hot blast stove can be changed to air supply. At this time, all combustion valves are closed, and all air supply valves are opened. Checkered bricks are heated and sent out. When the blast furnace is equipped with 3-4 hot blast stoves, two or three are heated and one is supplied with air. When the blast furnace is replaced in turn, two are heated.Gear low pressure vacuum carburizing
1
1
5
leadingcoating1
Aug 19, 2022
In General Discussion
Energy saving measures of heating furnace Heating furnaces, various industrial furnaces, and boilers are all high-energy-consuming kilns that consume a lot of resources. When the heating furnace heats the ingot, the temperature is high, and the flue gas takes away a large amount of high-temperature heat, resulting in wasted waste and low heat utilization rate. Measures to save energy and reduce consumption include: 1. Paint RLHY-2 black body radiation energy-saving paint on the inner wall of the heating furnace, increase the radiation rate of the refractory material of the heating furnace wall, and speed up the radiation heat transfer in the furnace. This product can achieve an energy saving rate of 10%~20%.Diamond vacuum brazing process 2. The high emissivity barrel-shaped device is installed on the inner wall of the heating furnace, which also plays the role of improving the emissivity of the refractory material of the furnace wall, accelerating the radiation heat transfer in the furnace, and the energy saving rate of the product is 3%~6%. The disadvantage of this method is that The investment is too large and the cost recovery period is relatively long.Titanium alloy and stainless steel dissimilar metal vacuum brazing 3. The use of honeycomb ceramic regenerator can achieve the purpose of waste heat recovery, but the one-time investment is large, there are many switching mechanisms, and the maintenance cost is high; cause serious energy loss. The use of heat exchangers can make up for the shortcomings of honeycomb ceramics, and has less investment, no switching mechanism, and no maintenance.Vacuum heat treatment process of steel
1
0
2
leadingcoating1
Aug 18, 2022
In General Discussion
Oil-fired gas boilers refer to boilers that can use both oil and gas. A boiler that can only use oil is called an oil-fired boiler, and a boiler that can only use gas is called a gas-fired boiler.Titanium alloy and stainless steel dissimilar metal vacuum brazing If the boiler is equipped with an oil-fired gas dual-fuel burner, then the boiler is an oil-fired gas boiler. Oil-fired gas boiler is a relatively general concept. Oil-fired gas boilers are mainly divided into boiling water boilers, hot water boilers, steam boilers and heat transfer oil boilers. When purchasing, choose different oil-fired gas boilers according to their own purposes.Vacuum carburizing and quenching of thin-walled ring gears and arc gears Oil-fired gas boilers are different from coal-fired boilers in that they require a burner to inject fuel into the boiler hearth, and use a fire chamber to burn without using a grate facility. Since no fuel ash is produced after the combustion of the oil-fired gas boiler, the oil-fired gas boiler does not need a slag discharge facility. If the oil and gas injected into the furnace are mixed with air within a certain range or extinguished, it is easy to explode. Therefore, oil-fired gas boilers need to use automated combustion and control systems. The oil-fired gas boiler has a compact structure. The small boiler body and its ventilation, water supply, control and auxiliary equipment are all set on a distribution box. The large and medium-sized boilers can also be assembled and shipped.Vacuum Brazing Process of Slide Valve Sub-assemblies
1
1
1
leadingcoating1
Aug 17, 2022
In General Discussion
Electric steam boiler The hot water or steam generated in the boiler can directly provide the thermal energy required for industrial production and people's life, and can also be converted into mechanical energy through a steam power device,MIM Process Equipment or into electrical energy through a generator. Boilers that provide hot water are called hot water boilers, which are mainly used in life and also have a small amount of applications in industrial production. Boilers that generate steam are called steam boilers, often referred to as boilers, and are mostly used in thermal power plants, ships, locomotives, and industrial and mining enterprises.Alternate Vacuum Brazing Process for Aluminum Alloy Materials Electric boiler is a kind of electric boiler that uses electricity as energy, converts electric energy into heat energy, heats the heat medium water or organic heat carrier (heat transfer oil) to certain parameters (temperature, pressure) through the heat exchange part of the boiler, and outputs the output with rated power. Quality thermal mechanical equipment. Electric boilers can be divided into: KS-D electric water boilers, CLDR (CWDR) electric hot water boilers (including electric heating boilers and electric bathing boilers), LDR (WDR) electric steam boilers, etc. A steam boiler is a boiler that produces steam of specified parameters and quality.The situation and solution of the scrapped vacuum furnace
1
1
1

leadingcoating1

More actions
bottom of page